Thermal Grizzly TG Conductonaut extreme – 1 g High Performance Liquid Metal Thermal Paste

Conductonaut Extreme liquid metal thermal compound is the further development of Conductonaut and was developed for applications with maximum power density. As a gallium-based liquid metal, Conductonaut Extreme is a metal alloy that is liquid at room temperature, allowing for the lowest possible layer thickness.

• Optimized thermal conductivity compared to conventional liquid metal
• Increased material compatibility
• Optimal fit due to metal needle
• Available in 1g or 5g syringes
• Caution! Electrically conductive!
• Do not bring into contact with aluminum!

Conductonaut Extreme Thermal Paste is not technically a thermal paste, as a paste is made up of liquid and solid particles. The downside of a paste is the solid particles. The surfaces of the CPU cooler baseplate and the CPU heat spreader are uneven on a microscopic level. A traditional thermal paste unevenly fills these irregularities. Since the solid particles are larger than the gaps caused by the unevenness, it has to fill a larger gap between the cooler and the heat spreader.

A thermal conductivity medium in the form of liquid metal does not have this problem because it does not contain “large” particles. As a result, the surfaces of the CPU cooler and the heat spreader are closer together. At the same time, liquid metal has a stable heat transfer, while larger solid particles in pastes usually transfer heat better than the parts of the paste. Liquid metal is preferable to thermal paste, especially in high-power applications.

Conductonaut Extreme is manufactured to the highest quality standards in our factory in Germany. Our specially trained staff constantly monitors the entire production chain. From checking the purity of the raw material, to the production of the liquid metal and filling, to packaging, the production is subject to multiple quality checks.

Conductonaut Extreme is recommended as a high-end product for experienced users looking for a solution with the best possible heat dissipation in the temperature range above 8°C. We recommend applying Conductonaut Extreme to nickel-plated copper, as this offers the best long-term stability.

In The Box

1x Syringe with liquid metal
1x Metal needle for application
1x Plastic needle for absorbing
2x Lint-free industrial cotton swabs
2x Cleaning pads

Note: Conductonaut Extreme thermal paste should not be used with aluminum coolers!

Note: Conductonaut Extreme is a metal alloy and may leave a visible residue. If liquid metal seeps into the heat sink, engraved information may become illegible and may void the manufacturer's warranty.

For best long-term performance, we recommend heatsinks with a nickel-plated copper base.