TENDA AX3000 WI-FI 6 LONG-RANGE ACCESS POINT

The Tenda AX3000 Wi-Fi 6 Long-Range Access Point is designed based on the new Wi-Fi 6 technology. It realizes a 160 MHz bandwidth band and a 5 GHz rate that reaches up to 2.4 Gbps, a rate three times higher than of regular Wi-Fi 5 access points and twice that of regular Wi-Fi 6 access points. The application of new technologies such as OFDMA, spatial multiplexing and MU-MIMO drives the network capacity of a single i29 access point to it is four times higher. High RF power design helps maintain Wi-Fi signal quality even over long distances, so wireless clients and AP can operate under high-performance Wi-Fi 6 mode. The i29 is an ideal choice for places like businesses and hotels to deploy high-performance Wi-Fi networks.

• Dimensions: Φ250.6 * 55 mmEthernet interface: One 10/100/1000 Mbps Ethernet port One 10/100/1000 Mbps Ethernet (PoE) portAntenna: 4 * 4 dBiButton: 1 * Reset

  LED Indicator: RGB

  Maximum Power Consumption: 15.74W

  Power Supply Standard: IEEE 802.3at PoE

  Frequency Band: 2.4GHz, 5GHz

  Data Rate: 2.4 GHz: 1-574 Mbps, 5 GHz: 6-2402 Mbps

  Wireless Network Standard: IEEE 802.11a/b/g/n/ac/ax

  Channel Width: 20MHz/40MHz/80MHz/160MHz

• Maximum Transmit Power:
  • 2.4 GHz Max Output Power: 29+/-1.5 dBm
  • 5GHz Max Output Power: 29+/-1.5dBm

  Sensitivity:

  • RX 802.11b sensitivity: -97dBm
  • RX 802.11n sensitivity at 2.4 GHz (MCS7): -75 dBm
  • RX 802.11a sensitivity: -95 dBm
  • RX 802.11n sensitivity at 5 GHz (MCS7): -75 dBm

  MU-MIMO technology: 2X2 MU-MIMO

  Operating Mode: Access Point (AP)

  Support hidden SSID: Supported

  Maximum Number of SSIDs:

  • 2.4 GHz: 7
  • 5 GHz: 4

  Maximum number of connected customers: 254

  Security Support:

  • WEP
  • WPA-PSK (AES/TKIP)
  • WPA2-PSK (AES/TKIP)
  • WPA3-ASE (AES)
  • WPA
  • WPA2
  • MAC address based access control

  System Settings:

  • Transmit power setting
  • AP isolation
  • Frequency analysis
  • Check connected customers
  • RSSI Threshold
  • VLAN tagging for SSIDs
  • LED control
  • Diagnostics: Ping, Traceroute
  • Scheduled reboot
  • Restart at specified time
  • Management through a central point
  • System logging
  • Firmware upgrade
  • Restore settings
  • Restore settings

  Default Connection IP: 192.168.0.254

  Default Login Username: admin

  Default Login Password: admin

  Operating temperature: -10℃ to 45℃

  Operating Humidity: (10% – 90%) RH,

  Storage Temperature: -30℃ to 70℃

  Storage Humidity: (10% – 90%) RH,