Lian Li UNI FAN INFINITY SINGLE WHITE – aRGB PWM 140mm 0.200~1600RPM (1pcs) NO controller Case Fan

INFINITY MIRROR FAN
A combination of the original UNI FAN SL and AL fans with an infinity mirror touch, the SL-Infinity fans shine clearly with multi-layered effects from any visible angle.

CENTERED ARGB INFINITY MIRROR
The circular-shaped infinity mirror at the center of the fan is configured to have multiple layers spaced 0.5mm apart.

ARGB SIDE PANEL
Following the iconic angular lighting style of the SL fans, the SL-Infinity fans feature 2 thin LED strips on either side of the fan blade.

ALUMINUM LINING SURROUNDED BY INFINITY MIRROR
Perimeter aluminum trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the front ARGB lighting strip in an up and down pattern that creates a 3D jagged look.

REAR LED RING AROUND THE ALUMINUM LOGO
Inspired by AL Fans, there is a bright ARGB light ring around the LIAN LI logo on the back.

UNIQUE MODULATIRY
The 2nd generation of UNI FAN SL revisits the clustering style that can connect up to 4 fans in a cluster and makes cable management simpler and improves compatibility with cooler components.

DAISY CHAIN FAN
A pin-to-pin contact point carries the signal and power through the fan assembly.

IMPROVED PERFORMANCE
The SL-Infinity 120 features a 10% performance optimization compared to the SL120, resulting in better airflow (61.3 CFM), higher static pressure (2.66 mmH2O) and a wider fan speed range (0.200 ~ 2100RPM) at lower noise levels (29 dB(A)).

L-CONNECT 3 SOFTWARE TO CONTROL SL-INF FANS
Accurately control and preview the lighting effect of SL-Infinity fans with the new L-Connect interface.

PERFECT LIGHTING EFFECTS
Similar to the AL fans, the L-Connect 3 can set the lighting effects of the SL-Infinity fans for both the fan blades and the inner edges of the fan frame separately, or select preset combined lighting effects.

• Dimensions: 140 x 142 x 25 mm (W x H x D)
• Materials: PBT, Aluminum
• Colour: White
•  Fans:
  • Bearing Type: Fluid Dynamic Bearing
  • Fan Speed: 200 – 1,600 RPM
  • Acoustic Noise: max 28 dB(A)
  • Airflow: max 72.7 CFM (123.5 m³/h)
  • Air Pressure: max 2.88 mmH2O
  • Operational Voltage: 12 V
  • Start Voltage: 6 V
  • Input Current: 0.15 A
  • Input Power: 1.8 W
• Lighting:
  • Type: digitally addressable RGB
  • No. of LEDs: 40
  • Input Current: 0.6 A
• Connection: 7-Pin combined PWM ARGB