Kolink REGULATOR 1000W Modular 80+ Gold PSU Power Supply Gen 5. ATX 3.0

KOLINK REGULATOR 80 PLUS GOLD 1000W FULLY MODULAR PSU

• ATX 3.0/PCIe 5.0 and compact design
• AWG16 12VHPWR 600W cable provided
• Efficiency rating 80 PLUS Gold – 90% efficiency at half load
• Top quality components including 100% Japanese capacitors
• Semi-fanless operation and fluid dynamic bearing for silent operation
• Extended security certifications (OVP, UVP, OPP, SCP, OCP, OTP, SIP)

COMPACT STYLE AND DESIGN

The fully Modular Kolink REGULATOR power supply features a compact 140mm design. It brings many modern features to your computer, for improved performance and reliable power supply. These include compatibility with the ATX 3.0 standard, with PCIe 5.0 and the provision of a dedicated 12VHPWR 600W cable to eliminate the need for additional adapters.

In addition, Kolink's REGULATOR series is 80 PLUS Gold certified. This means that at half load these power supplies operate at 90% efficiency.

HIGH QUALITY COMPONENTS

To ensure reliable performance, the Fully Modular PSU Kolink REGULATOR is built with premium components. The single-rail LLC DC/DC design combined with PCIe 5.0 compatibility allows efficient power delivery to all components, including modern graphics cards. Additionally, 100% Japanese capacitors facilitate high operating standards.

As a result, the Kolink REGULATOR can provide clean power with tight voltage regulation, even at full load.

SILENT FAN

The Kolink REGULATOR is equipped with a 120m fan, which has a fluid dynamic bearing. This promotes long life and durability of the components. Combined with the optimized fan blade curve and 8mm clearance from the frame, this fan creates minimal turbulence while still providing plenty of airflow.

In addition, a special semi-fanless mode is available to you. This can be activated via the switch next to the power button. When enabled, the power supply is passively cooled while loads are under 40%, for quieter cooling. In higher workloads, the fan starts at a lower speed, which increases as needed, depending on the temperature of your computer. Even if you don't use the semi-fanless mode, this PSU will run the fan at lower speeds when working with a lighter load.

SECURITY CERTIFICATES

For your peace of mind, the Kolink REGULATOR series has extensive safety certifications and seven-fold protections for its circuits.

• Overvoltage protection (OVP)
• Undervoltage protection (UVP)
• Over power protection (OPP)
• Short-circuit protection (SCP)
• Overcurrent protection (OCP)
• Overtemperature protection (OTP)
• Surge / inrush current protection (SIP)

Specifications:

• Dimensions: 150 x 86 x 140 mm
• Fan: 120mm (semi-passive mode, FDB fan)
• Color: Black (PSU, fan)
• Efficiency: min 90/87/87 percent at 50/20/100 percent load on European 230 Volt network. Meets requirements for 80 PLUS Gold.
• Active PFC
• Form factor: ATX 12V
• Standard: 3.0
• Output: 1,000W
  +3.3V: 20A
  +5V: 20A
  +12V: 1,000W / 83A
  -12V: 0.3A
  +5Vsb: 3A
• Connectors (removable):
  1x 20+4-Pin (600mm)
  2x 4+4-Pin ATX12V/EPS12V (650mm)
  1x 12+4-pin 12VHPWR PCIe 5.0 (600mm)
  4x 6+2-Pin PCIe 1x (600mm + 150mm) / 2x (600mm)
  7x SATA (500mm + 150mm + 150mm) / (500mm + 150mm + 150mm + 150mm)
  4x 4-Pin Molex (500mm + 150mm + 150mm + 150mm)
• Security:
  OVP/UVP (protection against over- and undervoltage)
  SCP (short circuit)
  OPP (overload)
  OCP (over-current protection)
  OTP (over-temperature protection)
  SIP (surge and inrush protection)