TENDA 5GHZ 23DBI 11AC OUTDOOR CPE O8

The O8 5GHz 23dBi 11ac Outdoor CPE is designed for PtP and PtMP solutions for private wireless ISP connectivity, CCTV surveillance and data transmission. It features a 23dBi vertical polarization directional antenna to provide an efficient way to receive and maintain stable connectivity over long distances of up to 20km. Adopting auto-bridging technology, two CPEs can be automatically connected to each other to facilitate setup.

What is he doing

The O8 5GHz 11ac 23dBi outdoor CPE is designed for PtP and PtMP solutions for private wireless ISP connectivity, CCTV surveillance and data transmission. It features a 23dBi vertical polarization directional antenna to provide an efficient way to receive and maintain stable connectivity over long distances of up to 20km. Adopting auto-bridging technology, two CPEs can be automatically connected to each other to facilitate setup.

Basic features

• 5GHz 11ac 433Mbps

• One fast ethernet port

• Directional antenna 23dbi

• Waterproof housing IP65

• Lightning protection 6000V

• AP,Station,WISP mode supported

• 50 meters passive PoE supply for flexible deployment

Transmission range 20+km

O8 adopts the independent power amplifier and 23dBi vertical polarization directional antenna to provide an efficient way to receive and maintain stable signal for wireless network up to 20km.

6000V surge protection design

O8 adopts 6000V ethernet port surge protection design, it can be more robust in thunder season.

Easy to assemble and install

O8 adopts three-axis alignment, easily assembled in seconds – no tools required. Only a single screwdriver is required for pole mounting.

Proprietary TD-MAX-Tenda TDMA protocol

TD-MAX is a proprietary Tenda TDMA (Time Division Multiple Access) protocol to improve performance and capacity for WISP wireless outdoor application scenarios. In the outdoor environment, the CPE uses highly directional antennas to connect to the Basestation from distances that can span several kilometers. the CPE cannot perceive each other, they become "hidden nodes" and cannot coordinate access to the wireless channel. Thus the Basestation suffers frequent collisions from stations transmitting at the same time. As the network scales, these collisions accumulate exponentially, increasing latency and reducing throughput. With TD-MAX, it coordinates all data transmission and allocates time to active clients to provide greater noise performance compared to the conventional 802.11 CSMA/CA (Carrier Sense Multiple Access / Collision Avoidance) protocol.

Change the channel to avoid interference

The O8 provides the Channel Shift function to compensate for the upper center frequency of 5 MHz. It can avoid interference from nearby AP and provide higher performance.

CPE Assistant-Centralized Management Platform

O8 is equipped with centralized management software that helps users easily manage all devices in their network from one computer – CPE Assistant. Functions such as device discovery, status monitoring, firmware upgrade and network maintenance can be managed using CPE Assistant.

Multiple application scenarios

1. Long distance wireless connection

One works as an AP function and another works as a station function to establish a long-distance PtP wireless connection for private ISP wireless connectivity, CCTV surveillance and data transmission.

2. WISP mode (Client+Router).

Connect wirelessly to the WISP station/hotspot to share the Internet on a local wireless and wired network.

Product Details

Model

O8

Dimension

391.5*280*223mm

Development

Pole Mount

Application scripts

PtP and PtMP wireless connection for private ISP access or CCTV surveillance

Utensils, accessories

Frequency Range

5 GHz

Compliant Standards

IEEE 802.11a/n/ac

Maximum wireless connection speed

433 Mbps

Interfaces

1*10/100Mbps Ethernet port

Antenna polarization

Vertical polarization

Antenna gain

23dBi

Antenna beamwidth

Vertical: 10° Elevation: 10°

GND

/

Reset button

1

Energy consumption

5.5W

Waterproof Level

IP65

LED indicator

PoE/LAN, LED1, LED2, LED3

Power method

12V1A Passive PoE

Lightning rod

6000V

Passive PoE

Passive power over ethenet via PoE/LAN (✚4.5pins,-7.8pins)

Voltage range: 9-35V DC

Capture sensitivity

11a 6Mbps -95dBm±1.5dBm

11n MCS7 HT20 -72dBm±1.5dBm

11ac MCS9 HT80 -64dBm±1.5dBm

Software

TDMA

Support

How It Works

AP/Station/WISP/P2MP/WDS Repeater/Router

Enable/disable wireless radio

Support

Hidden SSID

Support

Wireless client isolation

Support

SSID isolation

Support

Channel Range

20/40/80 MHz

Channel Shift

Support

Wireless access control

Support

Weak signal client limitation

Support

Transmission power

Adjustable power by 1dBm

WMM capability

Support

APSD capability

Support

Wireless security

64/128 WEP,WPA-PSK,WPA2-PSK,WPA

Transparent Bridge

Support

Adding VLAN tags for SSIDs

Support

DHCP server

Support

VPN Pass-Through

PPTP, L2TP

Remote Web Access

Support

Reboot schedule

Support

Page timed out

Support

Ping Watchdog

Support

Dyndns

noip, dyndns.org

Network diagnostics

Ping, Traceroute, Signal Scan

Set time and date

Support

Software upgrade