Lian Li LANCOOL 216 black – EATX/ATX/MICRO-ATX/MINI-ITX (front 160mmx2, rear 140mmx1)

AIRFLOW FOCUS
The LANCOOL 216 is a mainstream Case that features mesh panels throughout for optimal airflow. Thanks to its modular back panel, it can be optimized for air cooling or water cooling. Includes 2 x 160mm and 1 x 140mm pre-installed PWM fans and an innovative PCIe rear fan bracket to maximize airflow.

CONTINUOUS MESH FROM FRONT TO TOP
To ensure adequate airflow in the system, the LANCOOL 216 has mesh on the front, top and side of the PSU cover. The front mesh extends to the top for a continuous mesh panel.

AIR COOLING
Mounted higher, the motherboard leaves room above the PSU cover for wider fans.

WATER COOLING
Placed lower, the motherboard leaves a 63mm thick gap at the top for installing Radiators/Fans combos, ideal for AIO or Custom water cooling.

FRONT I/O CAN BE MOVED
Including a power button, a reset button, an audio port, 2x USB3.0 ports and a USB Type C port, the front I/O unit can be moved to the lower left side of the faceplate.

HARDWARE COMPATIBILITY
LANCOOL 216 supports ATX, Micro-ATX, MINI-ITX and E-ATX motherboards with width below 280mm. Furthermore, thanks to its symmetrical design, cable management in the 2nd chamber remains unaffected.

LATEST GENERATION GPU READY
With enough space for graphics cards up to 392mm long and 180mm high, the LANCOOL 216 is compatible with even the largest NVIDIA 4000 series cards.

NO PRESSURE LEAK
Pre-installed on the front of the upper radiator bracket, a sealing plate ensures no pressure leakage when installing smaller than 360/3x120mm radiator fans on the top.

REMOVABLE TOP RADIATOR BRACKET
The top bracket can be completely removed from the housing for easier hardware installation. The bracket is removed along with the left side frame bar.

PCIE FAN BRACKET
The GPU placed on top of the expansion slots opens up the possibility of adding a 120mm fan to the back of the Case without obstructing the GPU inlet/outlet. This is also possible with a vertically mounted GPU in both air-cooled and water-cooled modes. The additional 120mm fan provides better cooling for the GPU and greater I/O balance for the system.

VERTICAL GPU COMPATIBLE
The panel of PCIe expansion slots can be rotated for vertical installation of GPUs, only an additional riser cable is required.

STORAGE UP TO 6 x SSD + 2 X HDD 
A total of 2 x 3.5″ + 6 x 2.5″ drives can be installed with special bays for storage.

CABLE MANAGEMENT
LANCOOL 216 offers multiple options for easy cable management. Along the cable routing bar, 3 large velcro straps can hold 2 different sets of cables. 3 small clips are located along the rear side panel, ideal for clean routing of the CPU 8pin cable, and 2 additional velcro straps are located near the PSU chamber to help hold the extra length of PSU cable.