BETTER PRICE-PERFORMANCE RELATION
ARCTIC FREEZER 7 X CO is a compact CPU cooler with a 92 mm fan. It is compatible with many Intel® and AMD® Sockets. It benefits from an improved design and reworked heat pipe layout. Combined with the fan, which is optimized for high static pressure, ARCTIC has managed to significantly improve the cooling performance of the Freezer 7 X CO.

PRE-APPLIED MX-4 Thermal Paste
Pre-applied MX-4 high performance Thermal Paste ensures quick and clean assembly.

LONGER LIFE DUE TO LOW TEMPERATURE
Freezer 7 X CO uses a fan newly developed by ARCTIC. It works quietly and more efficiently, so the temperature is 20 °C lower than conventional motors. This significantly increases the lifespan of the fans, allowing ARCTIC to provide a 6-year warranty on the Freezer 7 X CO.

RELOCATION OF HOT PIPES ALLOWING OPTIMUM HEAT DISSIPATION
The heat pipes connected to the Freezer 7 X CO and the optimized design of the 44 cooling fins together ensure that the heat from the CPU can be ideally released into the air.

MORE EFFICIENT AND QUIET OPERATION
Power consumption was reduced from 0.25 A to 0.07 A, which corresponds to a real saving of 72 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer 7 X CO to run quietly when maxed out at 0.3.

10% GREATER COOLING CAPACITY
Freezer 7 X CO sets new standards in refrigeration. Compared to the previous one, a performance increase of almost 10 % could be observed. Thermal resistance corresponds to the absolute performance of a CPU cooler by indicating the temperature increase per unit of performance. It also represents the cooling performance independent of the processor and is the most accurate alternative to a TDP specification.

P-FANS FOR INCREASED PERFORMANCE
Inspired by the P series, the Freezer 7 X fan benefits from all the advantages of PFANs:
・ High static pressure for increased cooling efficiency
・ Wide RPM range
・Lower energy consumption
・ Less vibration
・ PWM for synchronous fan control

DYNAMIC IMAGING
Thanks to an alloy and lubricant combination developed in Germany, friction within the seat is reduced, leading to greater efficiency. In this way, less heat is generated, there is less frictional noise and the life of the fan is extended.

DIRECT CONTACT HOT PIPES
Freezer 7 X CO uses direct contact heated tubes. This ensures that the released heat is transferred directly to the pipes without an additional layer of material.